LOCKS AND STAY
T-100: Brass Plated steel trunk lock is 6 1/2" by 3 5/8". Two keys included.
| | T-100 |
||||||
Available in Two Sizes
T-109: Brass plated steel draw bolt is 2 3/4" by 1 1/2".
| | T-109 |
||||||
T-110: Brass plated steel draw bolt is 3 1/2" by 1 7/8".
| | T-110 |
||||||
T-119: Brass plated trunk lid stay Open Length is 6 3/4" by 7/8" wide.
| | T-119 |
||||||
T-149: Adjustable lid support (used for both right and left sides) 10" long by 11/16" wide.
| | T-149 |
||||||
HANDLE LOOP CAP
T-101: Opening is 1 1/4" wide, 1 7/16" deep, Overall dimension is 2 1/4" wide by 2 3/16" high. Opening height is 7/16". Brass plated steel. These end caps work well with the handles T-104 and T-105.
| | T-101 |
||||||
T-102: Opening is 1 3/16" wide, 1 1/2" deep, Overall dimension is 2 1/4" wide by 2 1/16" high. Opening height is 3/8". Brass plated steel. These end caps work well with the handles T-104 and T-105.
| | T-102 |
||||||
T-103: Opening is 1 1/8" wide, 1 3/8" deep, Overall dimension is 2 5/16" wide by 2 1/8" high. Opening height is 1/4". Stamped steel. These end caps work well with the handles T-104 and T-105.
| | T-103 |
||||||
OPEN END CAP STYLE
T-145: Overall length 1 7/8". Overall width is 15/8". Center opening 1 3/16" wide and 3/8" high. These end caps work well for securing handles T-106 and T-107.
| | T-145 |
||||||
T-146: Overall length 3 1/4". Overall width is 1 1/4". Center opening 1 1/4" wide and 3/8" high. Center Pin. These end caps work well for securing handles T-104 and T-105.
| | T-146 |
||||||
| | ||||
 Click for larger image |
T-104 LEATHER HANDLES Each handle comes in either natural or black. When ordering, make sure to specify which color. The end caps shown above are used to secure the handle to the trunk. See the item description for a list of end caps appropriate to each piece. 8 5/8" long x 1 1/8" high x 5 1/6" thick Please specify with and without slots. End caps T-101, T-102, T-103, T-143, T-146 and T-147 work well to secure this style handle to a trunk. |
|||
T-104: 8 5/8" long x 1 1/8" high x 5 1/6" thick Please specify with and without slots.
T-105: 9 7/8" long x 1 1/8" high x 5/16" thick. End caps T-101, T-102, T-103, T-143, T-146 and T-147 work well to secure this style handle to a trunk.
| | Natural |
||||||
| | Black |
||||||
T-106: 8 3/4" long x 1 1/4" high x 1/4" thick. End cap T-145 is designed to secure this style handle to a trunk.
| | Natural |
||||||
| | Black |
||||||
T-107: 9 3/8" long x 1 7/8" high x 5/16" thick. T-145 and T-146 are appropriate for securing this style handle to a trunk.
| | Natural |
||||||
| | Black |
||||||
BRASS TRUNK HANDLE
T-125: Overall dimensions are 1 1/2" high by 4" wide. Back plate is 1 1/2" high by 3 1/2" wide. Screws not included. Brass plated steel.
| | T-125 |
||||||
LID BUCKLE
T-139: 7 1/4" long by 1" wide. Strap end with brass plated buckle is 4 1/8" long by 1" wide. Includes (2) 1/2"brass plated screw rivets. Available in black or natural (as shown).
| | Natural |
||||||
| | Black |
||||||
SLAT CLAMPS
*****Slat clamps fit 2 1/8" to 2 1/4" wide slats as sold below*****
T-115: Stamped steel. 2 1/4" wide x 3" long.
| | T-115 |
||||||
T-116: Stamped steel. 2 1/2" wide x 2 3/4" long.
| | T-116 |
||||||
T-117: Stamped steel. 2 1/2" wide x 5 3/8" long.
| | T-117 |
||||||
T-126: Stamped steel. 2 1/2" wide by 3" long.
| | T-126 |
||||||
DECORATIONS
T-138: 2 1/8" in diameter. Stamped brass.
| | T-138 |
||||||
T-136: 1/2' in diameter. Stamped brass.
| | T-136 |
||||||
TRUNK CORNERS
T-152: Available in brass or nickel plated steel. 1 1/2"x 1 1/2" x 1 1/2"
| | Nickel
Limited Quantity Available |
||||||
| | Brass
Six Remaining in Stock |
||||||
T-114: Brass plated steel. 1 3/4" x 1 3/4" x 1 3/4".
| | T-114 |
||||||
CORNER CLAMPS
T-131: Side shown is 2 1/8" long by 1" wide. Second side (with 1 hole) is 1 1/2" long by 1" wide. Brass plated steel.
| | T-131 |
||||||
T-130: Both sides are 1 7/8" long by 1 5/16" wide. Brass plated steel.
| | T-130 |
||||||
T-133: Both sides are 1 3/4" long by 1 3/8" wide. Brass plated steel.
| | T-133 |
||||||
TRUNK STOP HINGES
T-141: 3 1/4" long by 1 1/2" wide. Brass plated steel.
| | T-141 < |
||||||
T-155: Brass plated glide is 1/2" high by 2" wide by 1 3/8" long.
| | |||||||
EMBOSSED TIN
T-134: 9 1/2" wide. 25 Gauge steel (.010" thick) Sold by the foot only. This item is not returnable.
| | |||||||
T-123: Each piece is 36" long x 2 1/4" x 1/4" thick.
| | T-123 |
||||||
Heavy gauge steel with black finish
T-156: 3/4" wide in a 10' coil. Due to the weight of this product, there is an additional $1.00 shipping charge per coil.
| | T-156 |
||||||
T-157: 3/4" wide in a 50' coil. Due to the weight of this product, there is an additional $3.50 shipping charge per coil.
| | T-157 |
||||||
T-158: 1 1/4" wide in a 10' coil. Due to the weight of this product, there is an additional $1.00 shipping charge per coil.
| | T-158 |
||||||
T-159: 1 1/4" wide in a 50' coil. Due to the weight of this product, there is an additional $4.00 shipping charge per coil.
| | T-159 |
||||||
Go To: 
